VBOX Sport can connect via Bluetooth to a Laptop running VBOX Test Suite to view live data and perform tests.
- After the VBOX Sport has been mounted and the SD card inserted, briefly press the Power button to switch on the device.
- If this is the first time you have connected the device to the Bluetooth-enabled laptop, navigate to the Bluetooth Settings area.
- Click on the Add Bluetooth or other device button and select the VBOX Sport unit (you only need to do this once as the unit will be remembered and the connection will be made automatically when the unit is in range and the Bluetooth is on).
Image missing
Image missing
Image missing
Image missing
- Open the VBOX Test Suite Software and navigate to the 'Home' tab, select the 'Online' button and choose the correct COM port for the VBOX Sport from the drop down menu.
Image missing
Once the software is connected to the VBOX Sport, the dashboard gauges will automatically start to display the data being sent live over the VBOX unit's serial stream.
In this Online mode, Start, Stop and Reset buttons will appear on the dashboard. These buttons are used to start, stop and reset any open tests.
Image missing
When in online mode, a newly created session will be populated with session data from the previous session (if entered).
Note: You can cancel the COM port selection before the software has fully opened online communications. Click on the X button next to the connection progress bar in the bottom left corner of the software window, as shown below.
Image missing
If the connection is lost, a Disconnected message is displayed. To reconnect again, select the Try Reconnect option.
You can find more information about viewing live data and performing tests with VBOX Test Suite here.