In the Digital I/O menu in VBOX Setup, you can configure the digital input and output settings.
Configure whether the digital input is used as either an event marker or as a track marker.
Enabling this mode allows the Digital Input to be used with an event marker.
Enabling this mode allows the Digital Input to be used as a track marker. The input switch can be used to set a start/ finish line, set a separate finish line, set a split line, clear all virtual lines and perform a coldstart.
- Set a start/finish line - Press and release of the input switch. GNSS speed must be greater than 5 km/h and the virtual line will be perpendicular to the direction of travel.
- Set a separate finish line - Press and hold of the input switch for more than 5 seconds. GNSS speed must be greater than 5 km/h and the virtual line will be perpendicular to the direction of travel.
- Set a split line - Double press of the input switch. GNSS speed must be greater than 5 km/h and the virtual line will be perpendicular to the direction of travel.
- Clear all virtual lines - Short press followed by a longer press over 1.5 seconds.
- Perform a coldstart - Grounding the Digital input whilst connecting to power.
This setting defines the digital output of VBOX Omega.
When this option is enabled, VBOX Omega will output a 5 V pulse for 1 second (by default) when a Start/Finish line is crossed. The duration of the pulse in seconds can be adjusted by entering a different value.
You can change the polarity of the pulse to either a rising or falling pulse by selecting the radio button next to the desired image.
When this option is enabled, VBOX Omega will output a 5 V pulse for 1 second (by default) when a Start/Finish line is crossed. The duration of the pulse in seconds can be adjusted by entering a different value.
You can change the polarity of the pulse to either a rising or falling pulse by selecting the radio button next to the desired image.
