VBOX Setup is a software application that configures VBOX 4 units. You can download the VBOX Setup software here.
The connection between the VBOX unit and the computer should be made via USB or Bluetooth for optimum performance.
When the VBOX unit is physically connected and powered, open the VBOX Setup software and use the dropdown list to select the COM port that your VBOX unit is connected to. Click Connect. VBOX Setup will open the configuration window for your VBOX unit.
Note: You may see an auto-detect message if you have changed the baud rate from the default value. Click Yes to allow the different baud rates to be scanned.
Available menus
The menu tiles in the sidebar allows you to select between the different menus. Click button to open that menu.
Available menus
The menu tiles in the sidebar allows you to select between the different menus. Click button to open that menu.
Menu title
Displays the title of the menu you are currently in.
Menu title
Displays the title of the menu you are currently in.
Help
Depending on which menu you have open, the question mark icon will open up the corresponding User Guide page in the Racelogic Support Centre, to provide more information about the features and settings in this menu.
Help
Depending on which menu you have open, the question mark icon will open up the corresponding User Guide page in the Racelogic Support Centre, to provide more information about the features and settings in this menu.
Language
Change the operating language.
Language
Change the operating language.
Settings Area
The main area in the application window (white background) contains the options for the menu you have selected.
Load
Click on the Load icon to load an existing configuration file into VBOX Setup.
Load
Click on the Load icon to load an existing configuration file into VBOX Setup.
Save
Click on the Save icon to save your current configuration to a VBOX configuration file on your local computer.
Save
Click on the Save icon to save your current configuration to a VBOX configuration file on your local computer.
Reset Defaults
Click on the Reset defaults button to reset the current configuration to the VBOX Setup default settings.
Reset Defaults
Click on the Reset defaults button to reset the current configuration to the VBOX Setup default settings.
Write to unit
After making changes to the configuration, you must press the Write to unit button to make sure that the settings are uploaded to the connected VBOX unit.
Write to unit
After making changes to the configuration, you must press the Write to unit button to make sure that the settings are uploaded to the connected VBOX unit.
Close
Closes the software, if changes have not been saved to the unit, you will be prompted to save the settings.
Close
Closes the software, if changes have not been saved to the unit, you will be prompted to save the settings.
Click on a menu below to see more information about it.
General
Save and load configuration files, see general information about your VBOX 4 unit including serial number and firmware version.
Channel Setup
Configure the channels for logging the required data with your VBOX 4 unit.
Logging
Configure your logging conditions for your VBOX 4 unit.
GNSS
Configure the GNSS settings for your VBOX 4 unit.
Slip Angle
Include additional slip measurements from other locations when using VBOX 4 ADAS or VBOX 4 Dynamics models.
IMU
Configure your IMU integration.
ADAS
Configure your VBOX 4 ADAS for ADAS testing.
CAN
Configure the CAN settings, export .dbc files, and enable full bus logging for the CANFD ports.
Ethernet
Configure the Ethernet settings for your VBOX 4 unit.
MFD
Configure which channels you want to be able to view on an MFD Touch unit connected to your VBOX 4.
Configure advanced settings such as digital and analogue outputs, and local coordinates.