| Reference | Description | Category | Product Code |
|---|---|---|---|
| Video VBOX Pro 10 Hz Unit | Video VBOX Pro unit enabled with 8 CAN channels | Video VBOX | VD10P |
| Mining System Pelicase with integrated cabling and voltage adaptor | Pelicase modified with heavy duty connector and voltage for Video VBOX Pro and IMU04, 524 mm x 428 mm x 206 mm (l x w x d) | Pelicase | RLACS245-V2 |
| Lemo 5 way Plug - USB A Socket (VVBOX USB Data Logging) | 2 m cable to connect solid state drive to Video VBOXProfor extended storage | Data Logging Storage | RLCAB073 |
| Lemo5 wayPlug - USB ‘A’ Plug (VVBOX USB Configuration) | 2 m cable to connect Video VBOX Pro to computer for configuration via Video VBOX Setup software | USB Config | RLCAB072 |
| Video VBOX Mono Microphone | 2.5 m cable with microphone to record audio to Video VBOX Pro | Microphone | RLACS133 |
| Antenna MagMount GPS L1 | GPS only antenna, detachable style without the antenna cable | Antenna | TW2010 (RLACS158) |
| Antenna Cable RF240 SMA Plug - N-Type Plug | 5.5 m heavy duty antenna cable to connect Pelicase to antenna (Ø6.1 mm) | Antenna | RLCAB138 |
| Ruggedised 580TVL camera with bulkhead connector | Video VBOX Pro camera, ruggedised with heavy duty stainless steel enclosure (660 g weight, M6 bolts on collar) | Heavy Duty Camera | 2 x RLACS244 |
| Camera Suction Mount | Lightweight camera/display suction mount, applicable to any video product,¼-20 UNC thread | Camera Mount | 2 x RLACS233 |
| Magnetic Adaptor | Magnetic adaptor for use with RLACS233, ¼-20 UNC thread | Camera Mount | 2 x RLACS251 |
| Lemo 4 way 2K Plug - Plug | 4 m heavy duty cable to connect Pelicase to heavy duty camera (7.5 x 9.3 mm) | Heavy Duty Camera | 2 x RLCAB135 |
| Lemo4 way2K Plug - Socket | 3 m heavy duty cable to extend camera cable length (7.5 x 9.3 mm) | Heavy Duty Camera | RLCAB136-3 |
| Lemo4 way2K Plug - Socket | 6 m heavy duty cable to extend camera cable length (7.5 x 9.3 mm) | Heavy Duty Camera | 3 x RLCAB136-6 |
| Lemo 2 way 0K Plug - Cigar Socket | 3 m cable to connect Pelicase to 12 V cigarette power supply (Ø3.5 mm) | Power Supply | RLCAB137 |
| Lemo 2 way 0K Plug - Unterminated | 10 m cable to connect Pelicase to vehicle power supply | Power Supply | RLCAB142-10 |
| SD Card | 128 GB SDXC Card | Data Logging Storage | RLACS211 |
| Reference | Description | Product Code |
|---|---|---|
| Mining System Ruggedised 580TVL kit | Rugged stainless steel standard-definition camera kit, including: camera, camera cable, and lightweight mount with magnetic adaptor | RLACS244KIT |
| Video VBOX 4.3 Preview Monitor - Lemo 6 way Plug | Small monitor to preview camera point-of-view (for use with Video VBOX Pro) | RLACS217 |
| Windscreen Suction Mount | Heavy duty suction mount for camera with ¼-20 UNC thread | RLVBACS041 |
| Reference | Description | Product Code |
|---|---|---|
| VBOX Inertial Measurement 04 (IP67) System | Device with 3x accelerometers and 3x gyroscopes to log inertial data to VBOX | RLVBIMU04 |
| Lemo 6 way Plug Splashproof - Lemo 5 way Plug Splashproof CAN only (VBOX IMU04) | 20 m cable to connect Pelicase to IMU04 (Ø4.3 mm) | RLCAB120S-20 |
| Blanking Plug for splashproof IMU module | Plug used to cover unused IMU port when only one IMU is connected | RLACS080 |
| CAN termination resistor Splashproof (5WSL) for IMU04 | Plug used to cover andterminate CAN Bus networkwhen more than one IMU is connected | RLACS165-S |
| Roof Mount for use with VBOX IMU04 Unit | Magnetic roof mount to fit IMU on a flat metal surface | RLACS216 |
| USB to Serial Adapter - 1 m | To connect IMU to a computer to configure or upgrade the unit. | RLACS076 |
| Reference | Description | Product Code |
|---|---|---|
| Lemo 5 way Plug Splashproof - 6 Wire Unterminated | 10 m cable to terminate and connect Pelicase to vehicle CAN bus | RLCAB015LS10 |
| Solid State Drive | 1 TB SSD | LS03WSSD-1TB |
| Reference | Description | Product Code |
|---|---|---|
| 5 Ah Li lon Battery Pack and Charger with Lemo 2 way Plug | Battery pack for Video VBOX Pro with charging plug | RLACS112L-XX |
Note:
- Pelicase includes bulkhead connectors for: 4 x cameras, 1 x CAN (i.e. IMU, Vehicle CAN Bus), 1 x antenna, 1 x power supply
- Notch on top of heavy duty camera denotes top-of-camera
- Check cabling dimensions for compatibility with fitment