Please register your VBOX unit so that we can provide you with notifications about the latest software releases and firmware upgrades for it and offer technical support.
Register your device here.
When you purchase a VBOX LapTimer with Side Connectors, you will find the following items when you open the box:
| Product Code | Quantity | Description |
|---|---|---|
| VBLAP02-S-V1 | 1 | VBOX LapTimer Unit with connectors on the side |
| RLACS262 | 1 | GNSS Antenna |
| RLCAB14LE | 1 | Unterminated Power Cable |
| RLACS313 | 1 | 8 GB SD Card |
| RLACS287 | 1 | Lightweight Windscreen Suction Mount |
When you purchase a VBOX LapTimer with Rear Connectors, you will find the following items when you open the box:
| Product Code | Quantity | Description |
|---|---|---|
| VBLAP02-R-V1 | 1 | VBOX LapTimer Unit with connectors on the rear |
| RLACS262 | 1 | GNSS Antenna |
| RLCAB14LE | 1 | Unterminated Power Cable |
| RLACS313 | 1 | 8 GB SD Card |
| RLACS359 | 1 | Rear Connector Bracket Assembly |
Depending on the application requirements, you may need to purchase additional accessories for your LapTimer.
| Product Code | Description |
|---|---|
| RLCAB010LE | In-Car Power Supply |
| RLACS286 | Roll Cage Camera Mount with Thumb Nut for RLVBLAP-S |
| RLCAB122 | VBOX LapTimer Connection Cablefor connecting VBOX LapTimer to a Video VBOX Pro or VBOX Video HD2 |
Any suitable 12 V supply powers the LapTimer. You must wire the unterminated end of the RLCAB014LE cable directly to a compatible power supply or to a connector that you can use with a compatible power supply.
The power port is the top Lemo port on the unit.
When you power up the LapTimer unit, the LEDs will light white and sweep through the LED array to indicate that the unit is powered and initialising.
The LapTimers can record to MMC, SD, SDHC and SDXC media cards formatted in a FAT or FAT32 format.
SDXC cards will be formatted as exFAT by default, a format type not supported by LapTimers. You can still use them, as long as you reformat them to FAT32 first. There are various free third-party applications available online to format SDXC cards.
If you do not have an SD card inserted in your VBOX LapTimer, it will show a No Media message while the vehicle is moving at speeds of 5 mph or less. This makes it easier for you to make sure that you have an SD card inserted before you start your logging.
You mostly use the OK button to configure the settings in the Menu.
However, it will also have some functionalities depending on the mode that is currently active on the screen.
See the list below for the full list of functionalities for the different display modes.
You mostly use the OK button to configure the settings in the Menu.
However, it will also have some functionalities depending on the mode that is currently active on the screen.
See the list below for the full list of functionalities for the different display modes.
| Mode | Function |
|---|---|
| Speed | Start and stop logging |
| Max Speed | Reset max speed value |
| Predictive Lap Timing | Single press fixes the current or stored lap as the reference lap, depending on the chosen settings. |
| Predictive Lap Timing | Press and hold for 5 seconds to clear the stored reference lap, reset the lap count and clear all stored lap times. |
| Lap Timing | Set a new start/finish line |
| Lap Count | No action |
| Lateral G | Reset max g reached |
| Longitudinal G | Reset max g reached |
Pressing this button in any display mode (except Speed Mode) will make the unit display the Speed Mode for 10 seconds before returning to the original display mode.
It will also act as a shortcut to exit the settings and go back to the display modes.
Pressing this button in any display mode (except Speed Mode) will make the unit display the Speed Mode for 10 seconds before returning to the original display mode.
It will also act as a shortcut to exit the settings and go back to the display modes.