Please register your VBOX unit so that we can provide you with notifications about the latest software releases and firmware upgrades for it and offer technical support.
Register your device here.
Image missing
Please register your VBOX unit so that we can provide you with notifications about the latest software releases and firmware upgrades for it and offer technical support.
Register your device here.
Image missing
When you purchase an OLED Display DSP07-L (RLVBDSP07-L), you will find the following items when you open the box:
| Product Code | Quantity | Descriptions |
|---|---|---|
| VBDSP07-L | 1 | OLED Display Unit with Lemo Connector |
| RLACS287 | 1 | Suction Mount |
Depending on which mode is currently active on the screen, the function of the OK button will change. The splash screen shown when scrolling through the menu describes the function of the OK button in each mode.
You can also find the complete list below.
Depending on which mode is currently active on the screen, the function of the OK button will change. The splash screen shown when scrolling through the menu describes the function of the OK button in each mode.
You can also find the complete list below.
| Display Mode | Function |
|---|---|
| Menu | Access the Menu |
| Speed | Start and stop logging |
| Max Speed | Reset max speed value |
| Predictive Lap Timing | Single Press fixes the reference lap according to your settings inFixed Lap ModePress and hold for >4 s to clear the stored reference lap and all lap timing data |
| Lap Timing | Set a new start/finish line |
| Lap Count | No action |
| Lateral G | Reset max g reached |
| Longitudinal G | Reset max g reached |
If you do not have an SD card inserted in your VBOX data logger, the OLED Display will show a No Media message while the vehicle is moving at speeds of 5 mph or less. This makes it easier for you to make sure that you have an SD card inserted before you start your logging.