When you purchase a Mini OLED Display (RLVBDSP06-L), you will find the following items when you open the box:
| Product Code | Quantity | Description |
|---|---|---|
| VBDSP06-L | 1 | Mini OLED Display Unit with Lemo 5-way plug |
| RLACS287 | 1 | VBOX Lightweight Suction Mount |
| Features | |
|---|---|
| View parameters, such as Live Speed, Max Speed, Lap Times and Predictive Lap Time | Internal accelerometer flips the display according to the mounting direction |
| Inverse screen colours or change font options for varying operation condition | Shows logging and capacity status of connected VBOX units |
| Easy operation with the 3-button keypad | Recognises data from standard VBOX CAN and serial output |
| Low power consumption | Recognises serial data output from all VBOX units |
| Delta V LED indicators | Combo G LED Indicators |
If the SD card you use in the connected data logging unit has less than 10 MB of space available, you will see a warning symbol flashing periodically indicating the amount of memory available.
Depending on which mode is currently active on the screen, the function of the OK button will change. The splash screen shown when scrolling through the menu describes the function of the OK button in each mode.
You can also find the complete list below:
| Mode | Function |
|---|---|
| Speed | Start and stop logging |
| Max Speed | Reset max speed value |
| Speed Bar | Set centre speed and speed display range |
| Predictive Lap Timing | Single Press fixes the reference lap according to your settings inFixed Lap Mode |
| Predictive Lap Timing | Pressing for >4 s clears the stored reference lap and all lap timing data |
| Lap Timing | Set a new start/finish line |
| Lap Count | No action |
| Lateral G | Reset max g reached |
| Lateral G Bar | Set min g and max g (targets) |
| Longitudinal G | Reset max g reached |
| Longitudinal G Bar | Set min g and max g (targets) |
| Menu | Access the Menu |
If you do not have an SD card inserted in your VBOX data logger, the OLED Display will show a "No Media" message while the vehicle is moving at speeds of 5 mph or less. This makes it easier for you to make sure that you have an SD card inserted before you start your logging.