When you purchase a Mini OLED Display (RLVBDSP06-L), you will find the following items when you open the box:
| Product Code | Quantity | Description |
|---|---|---|
| VBDSP06-L | 1 | Mini OLED Display Unit with Lemo 5-way plug |
| RLACS287 | 1 | VBOX Lightweight Suction Mount |
| Features | |
|---|---|
| View parameters, such as Live Speed, Max Speed, Lap Times and Predictive Lap Time | Internal accelerometer flips the display according to the mounting direction |
| Inverse screen colours or change font options for varying operation condition | Shows logging and capacity status of connected VBOX units |
| Easy operation with the 3-button keypad | Recognises data from standard VBOX CAN and serial output |
| Low power consumption | Recognises serial data output from all VBOX units |
| Delta V LED indicators | Combo G LED Indicators |
If the SD card you use in the connected data logging unit has less than 10 MB of space available, you will see a warning symbol flashing periodically indicating the amount of memory available.
Depending on which mode is currently active on the screen, the function of the OK button will change. The splash screen shown when scrolling through the menu describes the function of the OK button in each mode.
You can also find the complete list below:
| Mode | Function |
|---|---|
| Speed | Start and stop logging |
| Max Speed | Reset max speed value |
| Speed Bar | Set centre speed and speed display range |
| Predictive Lap Timing | Single Press fixes the reference lap according to your settings inFixed Lap Mode |
| Predictive Lap Timing | Pressing for >4 s clears the stored reference lap and all lap timing data |
| Lap Timing | Set a new start/finish line |
| Lap Count | No action |
| Lateral G | Reset max g reached |
| Lateral G Bar | Set min g and max g (targets) |
| Longitudinal G | Reset max g reached |
| Longitudinal G Bar | Set min g and max g (targets) |
| Menu | Access the Menu |
When setting up the DSP06 Mini OLED display with a VBOX Video HD2 or a Video VBOX Pro
To connect to a VBOX Video HD2, connect the cable to the ‘CAN / SER’ port.
To connect the Mini OLED Predictive Lap Timing Display and a CAN VCI at the same time to log external parameters from either a vehicle CAN Bus or a Racelogic expansion module.
Connect the single end of the splitter cable (RLCAB081) to the ‘SER’ port on the VBOX Video HD2 and connect the Mini OLED Display to one of the dual ends and your CAN VCI to the other.
To connect to a Video VBOX Pro, connect the cable to the ‘SER’ port.
The DSP06 Mini OLED Display has different display modes that you can access by using the ▲▼ buttons on the unit.
The data displayed on each screen is always calculated by the unit at all times, even if you choose not to display it. Click on the name of each mode to find relevant setup information.
Image missing
Image missing
When setting up the DSP06 Mini OLED display with a VBOX Video HD2 or a Video VBOX Pro
To connect to a VBOX Video HD2, connect the cable to the ‘CAN / SER’ port.
To connect the Mini OLED Predictive Lap Timing Display and a CAN VCI at the same time to log external parameters from either a vehicle CAN Bus or a Racelogic expansion module.
Connect the single end of the splitter cable (RLCAB081) to the ‘SER’ port on the VBOX Video HD2 and connect the Mini OLED Display to one of the dual ends and your CAN VCI to the other.
To connect to a Video VBOX Pro, connect the cable to the ‘SER’ port.
You can access the Mini OLED display menu by pressing the OK button when on the ‘Menu’ screen. You can navigate the menu with the ▲▼ buttons.
To see the full list of menu options and their functionalities, we recommend that you read the Menu Options page in our User Guide.
You can access the Mini OLED display menu by pressing the OK button when on the ‘Menu’ screen. You can navigate the menu with the ▲▼ buttons.
To see the full list of menu options and their functionalities, we recommend that you read the Menu Options page in our User Guide.
