An OLED upgrade cable of either RLACS151 or RLACS152 is required. If you do not have this cable, then the OLED may need to be returned to Racelogic to have the upgrade carried out.
Plug the 9 way serial connector from the RLACS151/152 into a computer. Press and hold the down button on the OLED (unit oriented with Racelogic text correct way up) while connecting power to the RLACS151/152. This will put the OLED into ‘upgrader’ mode. Double-click on the downloaded firmware file and follow the on screen instructions to complete the upgrade.
- Download the Latest OLED Firmware File from the VBOX Automotive website and copy this file onto your computer.
- Download the Racelogic Upgrader Software from the software section of the VBOX Automotive website.
Note: Please ensure that the latest version of Racelogic Upgrader is installed. - Connect the OLED to the computer using the 9-way serial connector on the RLACS151/152 cable.
- Press and hold the Down button on the OLED (unit oriented with Racelogic text correct way up) while connecting power to the RLACS151/152, this will put the OLED into ‘upgrader’ mode.
- Ensure that other software which may try and use the COM port communications, such as VBOX Setup is closed.
- Either ‘doclicklick’ on the ‘.ruf’ firmware upgrade file, which autoruns the Upgrader software, or run the Upgrader software and load in the ‘.ruf’ firmware upgrade file.
- Ensure the correct COM port is selected within 'Options' and press ‘Upgrade' to start the process.
- During the update, the screen will display a progress bar.
- Download the Latest OLED Firmware File from the VBOX Automotive website and copy this file onto your computer.
- Download the Racelogic Upgrader Software from the software section of the VBOX Automotive website.
Note: Please ensure that the latest version of Racelogic Upgrader is installed. - Connect the OLED to the computer using the 9-way serial connector on the RLACS151/152 cable.
- Press and hold the Down button on the OLED (unit oriented with Racelogic text correct way up) while connecting power to the RLACS151/152, this will put the OLED into ‘upgrader’ mode.
- Ensure that other software which may try and use the COM port communications, such as VBOX Setup is closed.
- Either ‘doclicklick’ on the ‘.ruf’ firmware upgrade file, which autoruns the Upgrader software, or run the Upgrader software and load in the ‘.ruf’ firmware upgrade file.
- Ensure the correct COM port is selected within 'Options' and press ‘Upgrade' to start the process.
- During the update, the screen will display a progress bar.
