As the name suggests, VBOX Touch is controlled by using the capacitive touch screen.
Generally, the different areas of the screen contain the following:
- Top of the screen – indicative status information
- Centre of the screen – mode and settings information (navigate by pressing the forward and back arrows or by swiping left or right)
- Bottom of the screen – function buttons
Do not remove the SD card when the Record Icon is red. You may lose data or damage the SD card if you remove it while the unit is logging.
The Settings Button will open a Settings area which contains menus for Display Mode Settings, General Settings, Serial Port Settings, Diagnostic Settings, Date & Time Settings and CAN Bus Settings.
The Display Mode settings shown on the Settings screen depend on which mode has been selected. You can find information about the settings for each mode in the specific mode areas.
The Settings Button will open a Settings area which contains menus for Display Mode Settings, General Settings, Serial Port Settings, Diagnostic Settings, Date & Time Settings and CAN Bus Settings.
The Display Mode settings shown on the Settings screen depend on which mode has been selected. You can find information about the settings for each mode in the specific mode areas.
By pressing the Screenshot Button you can save a full image of what is currently shown on the screen. This screenshot will be saved to the inserted SD card as a 1.5 MB bitmap image, orientated at 90° to the original screen image and with the prefix 'screenshot'. The LEDs will illuminate yellow in sequence from left to right to display the progress of writing to the SD card. Each LED represents 25% of the progress of the save. When the screen capture is complete, VBOX Touch will emit an audible confirmation notification. If the screenshot could not be saved, for example, no SD card is inserted or the card is full, the SD Card Icon at the top of the screen will flash 3 times and VBOX Touch will emit an audible error notification.
IMPORTANT
NEVER remove the SD card while a screenshot is captured and saved as it could cause the unit to crash!
By pressing the Screenshot Button you can save a full image of what is currently shown on the screen. This screenshot will be saved to the inserted SD card as a 1.5 MB bitmap image, orientated at 90° to the original screen image and with the prefix 'screenshot'. The LEDs will illuminate yellow in sequence from left to right to display the progress of writing to the SD card. Each LED represents 25% of the progress of the save. When the screen capture is complete, VBOX Touch will emit an audible confirmation notification. If the screenshot could not be saved, for example, no SD card is inserted or the card is full, the SD Card Icon at the top of the screen will flash 3 times and VBOX Touch will emit an audible error notification.
IMPORTANT
NEVER remove the SD card while a screenshot is captured and saved as it could cause the unit to crash!
You can view the test results history by selecting the Results button at the bottom of the current test screen.
These test results will be displayed until you choose a new test type or you press the Reset Button.
You can view the test results history by selecting the Results button at the bottom of the current test screen.
These test results will be displayed until you choose a new test type or you press the Reset Button.
