As the name suggests, you can control the Performance Box Touch by using its capacitive touch screen.
Generally, the top of the screen contains indicative status information, the centre of the screen contains mode/settings information which can be navigated by pressing the fwd/back buttons or by swiping the screen left/right, and the bottom of the screen contains function buttons.
Image missing
The Performance Box Touch has 4 LEDs above the display. These can flash in different colour and different frequency patterns depending on the process being performed. You can learn more about the LED behaviour on the Performance Box Touch here.
The SD card shouldn't be removed when the Record Icon is on as you may lose data.
The Settings Button will open a Settings area which contains Display Mode, General and Diagnostic Settings.
The options presented first within the Settings screen are dependent on the mode selected, information on these can be found within each specific mode area.
The Settings Button will open a Settings area which contains Display Mode, General and Diagnostic Settings.
The options presented first within the Settings screen are dependent on the mode selected, information on these can be found within each specific mode area.
Selecting the Screenshot Button will save a full image of what is shown on screen to the inserted SD card. If the screenshot has been saved successfully, the LEDs will illuminate yellow in sequence from left to right to display the progress of writing to the SD card. When screen capture is complete, Performance Box Touch will emit an audible confirmation notification. If the screenshot has been saved unsuccessfully, for example, no SD card is inserted or the card is full, the SD Card Icon at the top of the screen will flash 3 times and Performance Box Touch will emit an audible error notification.
The capture will be saved as a 1.5 MB bitmap image, orientated at 90° to the original screen image, with the prefix 'screenshot'.
IMPORTANT –
NEVER remove the SD card when a screenshot is being taken, it could cause the unit to crash!
Selecting the Screenshot Button will save a full image of what is shown on screen to the inserted SD card. If the screenshot has been saved successfully, the LEDs will illuminate yellow in sequence from left to right to display the progress of writing to the SD card. When screen capture is complete, Performance Box Touch will emit an audible confirmation notification. If the screenshot has been saved unsuccessfully, for example, no SD card is inserted or the card is full, the SD Card Icon at the top of the screen will flash 3 times and Performance Box Touch will emit an audible error notification.
The capture will be saved as a 1.5 MB bitmap image, orientated at 90° to the original screen image, with the prefix 'screenshot'.
IMPORTANT –
NEVER remove the SD card when a screenshot is being taken, it could cause the unit to crash!
A history of the test results can be viewed by selecting the Results Button at the bottom of the Primary Accel Screen.
Test results will display until a new test type is chosen or the Reset Button is pressed.
A history of the test results can be viewed by selecting the Results Button at the bottom of the Primary Accel Screen.
Test results will display until a new test type is chosen or the Reset Button is pressed.
