GNSS Monitor displays the NMEA Output from the external GPS Receiver used alongside LabSat. Connect the USB Port on the u-blox external receiver to a spare USB Port on the PC. The GNSS data being replayed is then displayed on the GNSS Monitor, as seen below. When configuring the GNSS monitor within the software settings tab, the GPS monitor option should be set to 'External Serial'.
Image missing
GNSS Monitor displays the NMEA Output from the internal GPS Receiver within LabSat 3. Connect the USB Port on the LabSat 3 to a spare USB Port on the PC. The GNSS data being replayed is then displayed on the GNSS Monitor, as seen below. When a dual constellation scenario is replayed, the GNSS monitor display can be changed by toggling between the pages of the LabSat 3 internal monitor.
Image missing