Recording/Replaying Digital Signals With LabSat 3

1. Connect the ‘DIGI’ and ‘GRN’ ports of the expansion connector to the appropriate wires/cable.
2. Power up the LabSat 3 and navigate to the ‘Digital’ section of the menu. Select the 'DIGI' option.
3. Fit the expansion connector to the LabSat.
4. Pressing the ‘REC’ button on the front of the LabSat will begin the recording. The LabSat will record all digital signals available.
    

1. Connect the ‘DIGO’ and ‘GRN’ ports of the expansion connector to the appropriate wires/cable.
2. Press the ‘Play’ button on the front of the LabSat to start the scenario replay.
    

If you need any further information about using the LabSat 3 for recording and replaying Digital signals, please get in contact with the Racelogic Support Department.