racelogic-support-centre
  • VBOX Positioning
    • Applications & Use Cases
    • Data Loggers
    • Positioning Devices
    • Processing & Computation
    • Accessories
    • Software
  • General Knowledge Base
    • .VBO Files
    • File Formats
    • GNSS Antenna Placement and Setup
    • How to Find the Hardware Variant of my Product
    • How to Find the Slip Angle From the Rear Axle of a Motorcycle
    • Installing and Configuring an IMU for Motorcycle Applications
    • Product Life Cycle
    • VBOX Cables
    • What are GPS Leap Seconds?
    • Where to Buy Racelogic Products
  • Internal Knowledge Base
    • VBOX Touch F9 GNSS Engine Upgrade
    • VB20SL3 GPS LED Behaviour
    • Connecting the Screen Inside an RLCAB063 / DSP05 Flying Lead
    • Installer Failure and Fails to Open
    • 01 Self-service style guide principles
    • 02 Capitalisation
    • 03 Numbers
    • 04 Procedures and instructions
    • 05 Tips for style and voice
    • 06 Words and phrases to avoid
    • 07 Bias-free communication
    • Testing Import of HTML from Document360 to MindTouch
    • B110 Bulkhead Socket Disconnection
    • VB3i Analogue Input Accuracy
    • VB3i B110/B210 Engine Lock Out
    • VB3i GPS Reception Issues
    • VB3i TOPCON GPS Upgrade/ Downgrade
    • VB3i V5 D/DR Not Booting
    • VBOX Video HD2 Camera Wire Connection Inspection/Repair
  • VBOX Automotive
    • Applications & Use Cases
    • Data Loggers
    • Sensors
    • Inertial Measurement Units
    • Telemetry Solutions
    • Displays, Modules & Accessories
    • Software
    • Mobile Apps
    • Databases
    • Knowledge Base
    • Discontinued & Legacy Products
  • VBOX Motorsport
    • Applications & Use Cases
    • Video Data Loggers
    • Performance Meters
    • Lap Timing
    • Pit Timing
    • Displays, Modules & Accessories
    • Live Streaming
    • Sensors
    • Software
    • Mobile Apps
    • Databases
    • Knowledge Base
    • Discontinued & Legacy Products
  • GNSS Simulators
    • Applications & Use Cases
    • LabSat 4
    • LabSat 3 Wideband
    • LabSat 3
    • Software
    • Knowledge Base
    • Discontinued & Legacy Products
  • GNSS Simulators
    • Applications & Use Cases
    • LabSat 4
      • Overview
      • Quick Start Guide
      • User Guide
        • Getting Started
        • Hardware Overview
        • User Interface
          • LabSat Display & Settings
          • Web Server
          • Remote Control
          • File Transfer
        • Record & Replay
      • Technical Properties
        • Pinouts
        • Technical Specifications
        • Declarations
      • Firmware Updates
      • Knowledge Base
        • Troubleshooting
        • Converting Scenario Files for LabSat 4
        • Expansion Connectors
        • External Reference Clock with LabSat 4
        • External Synchronisation with LabSat 4
        • Formatting Blank SSDs With LabSat 4
        • Formatting the Internal SSD with Linux File Systems for Windows by Paragon
        • How to Use a UGREEN 2.5Gbps Ethernet Adapter with a NAS Device
        • How to Use Fixed Gain Mode on LabSat 4 (RP) to Evaluate the Performance of Different Antennas
        • How to Use LabSat 4 With a High-Bias Antenna
        • How to View the NMEA Output From LabSat 4 During Relpay
        • NAS Configuration Limits
        • NAS Replay Limits With LAN2 (USB LAN)
        • Recording and Replaying RTK Data with LabSat 4
        • Recording and Replaying to an External USB Storage Device
        • SSD File Layout
        • Digital Gain in Low-Level GNSS Signal Recording
        • Using LabSat 4 with Network Attached Storage Devices
        • Using LAbSat 4 with UGREEN 2.5Gbps USB to Ethernet Adapter
        • Overview of Possible Configurations with LabSat 4
        • What is the NMEA Output Format During Replay with LabSat 4
    • LabSat 3 Wideband
      • Overview
      • Quick Start Guide
      • User Guide
        • Introduction
        • Components
        • Wideband Media
        • Synology Configuration
        • Synology Functionality
        • Menu layout
        • Record and Replay Operations in Detail
        • GNSS Monitor
        • SSD File Layout
        • Battery
        • External Reference Clock Input
        • Digital Channels
        • CAN Bus
        • RS232
        • Digital In / Out
        • External Synchronisation
        • WiFi Dongle
        • Remote Control
        • Converting LabSat Scenarios
        • SatGen Software
      • Web Server
        • Introduction
        • Hardware Configuration
        • WiFi Dongle
        • Frequency Setup
        • Record and Playback
        • GNSS Monitor
        • Digital IO Setup
        • System Setup
        • Remote Control and SDK
      • Remote Control
        • Introduction
        • Terminal Software
        • Connecting to LabSat 3 Wideband
        • Remote Control Commands
      • Technical Properties
        • Cable Identification
        • CE Declaration of Conformity
        • PIN OUTS
        • Replacement Parts and Optional Accessories
        • RoHS Declaration
        • Technical Specificiation
      • Firmware Updates
      • Knowledge Base
        • Troubleshooting
        • LabSat 3 Wideband - I/Q Signals and Quantisation
        • LabSat 3 Wideband - Power Consumption Grid
        • LabSat Recording Capability Comparison
        • Recording/Replaying Arbitrated CAN With LabSat 3 Wideband
        • Recording/Replaying Digital Signals With LabSat 3 Wideband
        • Recording/Replaying Digitised CAN With LabSat 3 Wideband
        • Recording/Replaying RS232 With LabSat 3 Wideband
        • Recording/Replaying RTK With LabSat 3 Wideband
        • Using LabSat 3 Wideband with Synology NAS
    • LabSat 3
      • Quick Start Guide
      • User Guide
        • Introduction
        • LabSat3 Components
        • Media
        • Menu layout
        • Recording and Replaying
        • HDD File Layout
        • Battery
        • External reference clock input
        • Digital Channels
        • CAN Bus
        • Digital In/Out
        • Remote control
        • Converting LabSat scenarios
        • SatGen Software
      • Remote Control
        • Introduction
        • Terminal Software
        • Connecting to LabSat 3
        • Commands
      • Technical Properties
        • Cable Identification
        • EC Declaration of Conformity
        • Label
        • PIN OUTS
        • Replacement Parts and Optional Accessories
        • RoHS Declaration
        • Technical Specification
      • Firmware Updates
      • Knowledge Base
        • Troubleshooting
        • How to format an SD card using LabSat 3
        • How to view the NMEA output from a LabSat 3 during replay
        • LabSat 3 CAN-Bus Logging
        • LabSat 3 Power Consumption Grid
        • Record/Replay Pause Control for LabSat 3
        • Recording/Replaying Arbitrated CAN With LabSat 3
        • Recording/Replaying Digital Signals With LabSat 3
        • Recording/Replaying Digitised CAN With LabSat 3
        • Recording/Replaying RS232 With LabSat 3
        • What is the NMEA output format during a LabSat 3 replay?
    • Software
      • SatGen 4
        • Overview
        • Quick Start Guide
        • User Guide
          • Getting Started
          • Software Overview
          • The Toolbar
          • The Settings Area
          • Adding Waypoints
          • Editing Waypoints
          • Creating Files
          • Playing Simulations
          • Orbital Trajectory
        • Updates and Release Notes
        • Knowledge Base
          • Creating a Leap-Second Scenario
          • Creating a Space Simulation
          • Creating a Static Scenario
          • Example Data Files - SatGen 4
          • GGA NMEA Format and Data File Example - SatGen 4
          • How to Upgrade from SatGen 3 to SatGen 4
          • How to Use Multiple LabSat Realtime Units for SatGen 4 Simulation at the Same Time
          • LabSat 3 Wideband Signal Descriptions - SatGen 4
          • NMEA Smoothing
          • Output Formats - SatGen 4
          • LabSat 3 Wideband Quantisation Selection - SatGen 4
          • Security Dongle Information - SatGen 4
          • Signal to Noise Ratio - SatGen 4
          • System Requirements - SatGen 4
      • Extensions Software
        • Overview
        • User Guide
          • Extensions Introduction
          • Extensions GNSS Monitor
          • Extensions Video Sync
          • Extensions Serial Proxy
          • Extensions CAN Output
          • Extensions Speed Pulse
          • Extensions Turntable Module
        • Knowledge Base
    • Knowledge Base
      • Converting LabSat Scenarios
      • Where to Buy
      • How do I register my LabSat?
      • Issues Accessing LabSat 4 or LabSat 3 Wideband Via Ethernet
      • LabSat Antenna Matrix
      • RLACS156
      • RLACS198
      • RLACS205
      • RLACS206
      • RLACS225
      • RLACS249
      • RLACS278
      • RLACS354
      • LabSat Antenna Placement and Setup
      • LabSat Leap Second Guide
      • LabSat Lite Discovery Script
      • LabSat Rollover
      • Production Line Sensitivity Testing with LabSat
      • Quantization
      • Using LabSat with an RF Chamber
      • What are I and Q Signals?
    • Discontinued & Legacy Products
      • LabSat Real-Time & Real-Time+ (Discontinued)
        • User Guide
          • Getting Started
          • Hardware Overview
          • Hardware Connections
          • Hardware-in-Loop System
          • Configuration
            • NMEA Test Utility
            • Syncbox
          • Operation
          • SatGen Real-Time System Tray
        • Technical Properties
        • Knowledge Base
          • Example Codes to Send Fixed GPS Data to the Syncbox
          • Hardware-In-Loop System
          • Syncbox
          • System Connection
      • LabSat 2 (Legacy)
        • User Guide
          • 01 - LabSat 2 Introduction
          • 02 - LabSat 2 Operation
          • 03 - LabSat 2 Hardware overview
          • 04 - LabSat 2 PC Requirements
          • 05 - LabSat 2 Installing Software
          • 06 - LabSat 2 Connecting USB
          • 07 - LabSat 2 Software Overview
          • 08 - LabSat 2 Software Settings
          • 09 - LabSat 2 Recording GNSS Data
          • 10 - LabSat 2 Recording Event Inputs
          • 11 - LabSat 2 Replaying GNSS Data
          • 12 - LabSat 2 SatGen v2 Software
          • 13 - Converting LabSat scenarios
          • 14 - LabSat 2 Interface Modules
          • 15 - LabSat 2 Video Syncronisation
          • 16 - LabSat 2 Advanced functions
          • 17 - LabSat 2 Software Development Kit (SDK)
          • 18 - LabSat 2 Inventory and optional extras
          • 19 - LabSat 2 PIN OUTS
          • 20 - LabSat 2 Technical specifications
          • 21 - LabSat 2 Cable Identification
        • Firmware Updates
        • Knowledge Base
          • LabSat 2 - Troubleshooting
          • The firmware upgrade will not run on LabSat 2.
      • LabSat 1 (Legacy)
        • User Guide
          • 01 - LabSat Introduction
          • 02 - LabSat Operation
          • 03 - LabSat PC Requirements
          • 04 - LabSat Installing Software
          • 05 - LabSat Connecting USB
          • 06 - LabSat Software Overview
          • 07 - LabSat Software Settings Menu
          • 08 - LabSat Recording GPS Data
          • 09 - LabSat Recording Event Inputs
          • 10 - LabSat Replaying GPS Data
          • 11 - Converting LabSat 2 scenarios
          • 12 - LabSat SatGen v2 Software
          • 13 - LabSat Interface Modules
          • 14 - LabSat Video Syncronisation
          • 15 - LabSat Troubleshooting
          • 16 - LabSat Software Development Kit (SDK)
          • 17 - LabSat Inventory and optional extras
          • 18 - LabSat PIN OUTS
          • 19 - LabSat Technical specifications
          • 20 - LabSat Cable Identification
      • LabSat Turntable and Accessories (Legacy)
        • User Guide
          • 01 - Turntable Introduction
          • 02 - Turntable Software Installation
          • 03 - Turntable Record System
          • 04 - Turntable Replay System
          • 05 - Turntable Simulation System
          • 06 - Turntable Video Synchronisation
        • With LabSat 3
          • LabSat 3 - Turntable CAN Record
          • LabSat 3 - Turntable CAN Replay
          • LabSat 3 - Turntable Simulation Replay - CAN
          • LabSat 3 - Turntable Simulation Replay - Speed Pulse
          • LabSat 3 - Turntable Speed Pulse Record
          • LabSat 3 - Turntable Speed Pulse Replay
        • With LabSat 3 Wideband
          • LabSat 3 Wideband - Turntable CAN Record
          • LabSat 3 Wideband - Turntable CAN Replay
          • LabSat 3 Wideband - Turntable Simulation Replay - CAN
          • LabSat 3 Wideband - Turntable Simulation Replay - Speed Pulse
          • LabSat 3 Wideband - Turntable Speed Pulse Record
          • LabSat 3 Wideband - Turntable Speed Pulse Replay
        • Knowledge Base
          • Aerotech ARDS 150 Turntable Auto Tune/Calibration
          • Turntable Connection Instructions
      • Software
        • SatGen 3 (Legacy)
          • Overview
          • Quick Start Guide
          • User Guide
            • 01 - SatGen Introduction
            • 02 - SatGen System Operation
            • 03 - SatGen Output Formats
            • 04 - SatGen Dynamic Scenario Creation
            • 05 - SatGen Importing Files
            • 06 - SatGen Static Scenario Creation
            • 07 - SatGen User Defined
            • 08 - SatGen Leap Second Scenario Generation
            • 09 - SatGen Space Simulations
            • 10 - SatGen Real Time Creation
            • 11 - SatGen Wideband
            • 12 - SatGen Example Data Files
            • 13 - SatGen Appendix
          • Knowledge Base
            • How do I check which version of SatGen I am using?
            • How to create a single satellite scenario with SatGen v3
EXPLORE ARTICLES
  1. Home Page
  2. GNSS Simulators
  3. Knowledge Base

Knowledge Base


Converting LabSat Scenarios
Converting LabSat Scenarios
Where to Buy
Where to Buy
How do I register my LabSat?
How do I register my LabSat?
Issues Accessing LabSat 4 or LabSat 3 Wideband Via Ethernet
Issues Accessing LabSat 4 or LabSat 3 Wideband Via Ethernet
LabSat Antenna Matrix
LabSat Antenna Matrix
RLACS156
RLACS156
RLACS198
RLACS198
RLACS205
RLACS205
RLACS206
RLACS206
RLACS225
RLACS225
RLACS249
RLACS249
RLACS278
RLACS278
RLACS354
RLACS354
LabSat Antenna Placement and Setup
LabSat Antenna Placement and Setup
LabSat Leap Second Guide
LabSat Leap Second Guide
LabSat Lite Discovery Script
LabSat Lite Discovery Script
LabSat Rollover
LabSat Rollover
Production Line Sensitivity Testing with LabSat
Production Line Sensitivity Testing with LabSat
Quantization
Quantization
Using LabSat with an RF Chamber
Using LabSat with an RF Chamber
What are I and Q Signals?
What are I and Q Signals?
© Copyright 2026 Racelogic Limited - All Rights Reserved

RACELOGIC Websites