18 - LabSat PIN OUTS

Updated on Mar 4, 2026

 

Front View of LabSat
 

Connector 1 - POWER (Lemo 2 PIN) #

PIN	I/O	Function	Range
1	I	Power+	5.4 V to 30 V
2	I	Ground	0V

Connector 2 - AD 1 (Lemo 3 PIN) #

PIN	I/O	Function	Range
1	I	Analogue 1 Input	0V to 5V
2	I	Digital 2 Input	0V to 5V
3	I	Ground

Connector 3 - AD 2 (Lemo 3 PIN) #

PIN	I/O	Function	Range
1	I	Analogue 2 Input	0V to 5V
2	I	Digital 1 Input	0V to 5V
3	I	Ground

Connector 4 - DIG OUT (Lemo 3 PIN) #

PIN	I/O	Function	Range
1	I	Ground
2	O	Digital Out 1	0V to 5V (14v tolerant)
3	O	DigitalOut 1	0V to 5V (14v tolerant)

Connector 5 - CAN (Lemo 5 PIN) #

PIN	I/O	Function	Range
1	O	RS232 Tx (PORT B)	±12v
2	I	RS232 Rx (PORT B)	±12v
3	I/O	CAN Bus High (PORT A)	Reserved for future use
4	I/O	CAN Bus Low (PORT A)	Reserved for future use
5	O	+V Power	Same as Power+

Connector 6 - RS232 SER (Lemo 5 PIN) #

PIN	I/O	Function	Range
1	O	RS232 Tx (PORT A)	±12v
2	I	RS232 Rx (PORT A)	±12v
3	I	Digital Input 1	0V to 5V
4	O	Digital Output 1	0V to 5V
5	O	+V Power	Same as Power+

SMA Connectors - RF OUT and Antenna SMA #

Image missing

PIN	I/O	Function
Center	-	RF Signal / Power for active antenna
Chassis	-	Ground