Configure the output baud rates and termination and export the channel information as a .dbc file.
| Channel usageThis area will display the CAN bus channel load.If the bus loading is more than 70%, the icon in the top right corner will become red. When it is more than 75% the icon will start flashing. If you choose to write to the unit while the CAN bus loading exceeds 70%, you will trigger a warning message. |
| OutputThe software has four baud rate output values:1000 kbit/s500 kbit/s250 kbit/s125 kbit/s |
| Output terminationSelect toEnableorDisableCAN output termination. |
| Output rateSelect to choose the CAN output rate:1 Hz5 Hz10 Hz20 Hz50 Hz100 Hz |
| Export to DBCCreate a .dbc file of the currently configured VBOX channels. |
Select which CAN output identifiers you would like transmitted.
| Send | To switch a CAN message on/off, tick or untick the box for the corresponding message. |
| Default / Actual ID | This allows the modification of the CAN IDs transmitted by the VBOX unit. Default values are the Racelogic standard IDs of 0x301, 0x302 …. 0x307. |
| Xtd | To change the identifier format from standard 11-bit to extended 29-bit, tick theXtdbox in the corresponding column. |
| Data bytes | Shows which channels will be sent out in each message. |