In the Tests menu in VBOX Setup, you can configure lap timing settings.
Configure the lap timing settings, start/finish and split gates.
This sets the width of any gates set (25 m by default). It is a useful feature when two parts of a track run very close to each other, or the pit lane is next to the start/finish line, as lowering this value can stop the virtual line being triggered by the incorrect area of the circuit.
This option controls the duration of the CAN status bit (1 s by default) at the moment of crossing the start/finish line.
Other lap timing CAN channels such as lap time and split time are held for 2 s duration as default, or the highest digital pulse duration setting if greater.
Determines whether the 'Split Time' CAN channel is either the total lap time at split cross or the delta time between split lines.
Use the Load button to load a .spl, .dsf or .vbo file containing start/finish and split gates. The gates can also be saved in a different format by selecting the Save button or removed using the Clear button.