Getting Started

Updated on Mar 4, 2026

Please register your VBOX 100 Hz GPS Speed Sensor (v5) unit so that Racelogic can continue to provide you with notifications about the latest software releases and firmware upgrades for your Racelogic product and offer technical support.

Register your device here.

VBOX 3iSDR - Front Display
VBOX 3iS V2_top
VBOX 3iSDR - Front Display
VBOX 3iS V2_top
RLVBSS100-V5VBOX 100 Hz GPS Speed Sensor (v5)
Product CodeQuantityDescription
VBSS100-V51VBOX 100 Hz GPS Speed Sensor unit
RLACS283/RLACS3241Dual Band GNSS Antenna (includes 4 m removable cable)
RLCAB1631Cable loom - Deutsch 23W ASDD - Multiple Connectors
RLCAB0011Lemo 5 W plug - 9 W Socket - 2 m (serial configuration)
RLACS1061VBOX Plastic Carry Case
RLCAB010LE1Lemo 2W Plug - Cigar Plug - 2m cable (Power) Screened
RLCALUKAS1Certifiate of Calibration

Note: You may have to order additional cables separately

VBOX 100 Hz Speed Sensor units are powered via the POWER IN lead or the CAN OUT + POWER lead on the supplied loom. You can use the RLCAB010LE cable to connect to a 12 V ouput point in a vehicle or you can use a battery pack (RLACS333-L).


VBOX Speed Sensors have been designed to generate as little heat as possible and has a wide operating temperature range. It is, however, good practice to mount it in a position where it has sufficient airflow around the unit.


Image missing
CableFunctionCableFunction
AUNIT CONNECTORGCAN IN
BSERIALHETHERNET
CPOWER INICAN OUT + POWER
DCAN OUTJAUX
EDIGITAL OUTKDGPS
FDIGITAL IN

Note: You can find the complete pinout information for the VBOX unit here.