Dual Antenna Mode
Note: You must enable the Dual Antenna Mode to see the rest of the Dual Antenna menu.
Dual Antenna Mode
Note: You must enable the Dual Antenna Mode to see the rest of the Dual Antenna menu.
Antenna Separation
Allows you to enter distance between primary and secondary antennas.
Max 9.999 metres.
Antenna Separation
Allows you to enter distance between primary and secondary antennas.
Max 9.999 metres.
Antenna Orientation
Allows you to intimate to the unit whether the antennas are configured in Roll configuration or Pitch configuration.
Antenna Orientation
Allows you to intimate to the unit whether the antennas are configured in Roll configuration or Pitch configuration.
Antenna Alignment
To measure the slip angle, try to get the alignment of the antennas as close as possible to the centreline of the vehicle. You can remove any residual errors in this alignment by using the Auto Align feature.
Select Auto-align to start the alignment process.
Note: You will need to drive in a straight line at a constant speed of more than 25 km/h for a short period of time for the alignment to complete.
Select Clear to remove an already set antenna alignment.
Antenna Alignment
To measure the slip angle, try to get the alignment of the antennas as close as possible to the centreline of the vehicle. You can remove any residual errors in this alignment by using the Auto Align feature.
Select Auto-align to start the alignment process.
Note: You will need to drive in a straight line at a constant speed of more than 25 km/h for a short period of time for the alignment to complete.
Select Clear to remove an already set antenna alignment.
Antenna Level
A procedure to account for vertical deviation between antennas to mitigate any knock-on effect on pitch/roll.
Select Auto-level to start the alignment process.
Select Clear to remove an already set antenna level.
Antenna Level
A procedure to account for vertical deviation between antennas to mitigate any knock-on effect on pitch/roll.
Select Auto-level to start the alignment process.
Select Clear to remove an already set antenna level.
CoG Slip Offset
The Centre of Gravity offset must be measured from the primary antenna and entered in metres with 2 decimal places.
CoG Slip Offset
The Centre of Gravity offset must be measured from the primary antenna and entered in metres with 2 decimal places.
FL Slip Offset
The Front Left offset must be measured from the primary antenna and entered in metres with 2 decimal places.
FL Slip Offset
The Front Left offset must be measured from the primary antenna and entered in metres with 2 decimal places.
FR Slip Offset
The Front Right offset must be measured from the primary antenna and entered in metres with 2 decimal places.
FR Slip Offset
The Front Right offset must be measured from the primary antenna and entered in metres with 2 decimal places.
RL Slip Offset
The Rear Left offset must be measured from the primary antenna and entered in metres with 2 decimal places.
RL Slip Offset
The Rear Left offset must be measured from the primary antenna and entered in metres with 2 decimal places.
RR Slip Offset
The Rear Right offset must be measured from the primary antenna and entered in metres with 2 decimal places.
RR Slip Offset
The Rear Right offset must be measured from the primary antenna and entered in metres with 2 decimal places.
