Please register your VBOX 3iS Dual Antenna RTK unit so that Racelogic can continue to provide you with notifications about the latest software releases and firmware upgrades for your Racelogic product and offer technical support.
Register your device here.
| RLVB3ISDR-V1VBOX 3iS 100 Hz GNSS system - Dual Antenna, RTK (low latency) with ADAS and Motion Pack functionality. |
|---|
| Product Code | Quantity | Description |
|---|---|---|
| VB3ISDR-V1 | 1 | Dual Antenna with RTK Unit |
| RLACS283 | 2 | Dual Band GNSS Antenna |
| RLCAB001 | 1 | Lemo 5 W plug - 9 W Socket - 2 m (serial configuration) |
| RLCAB163 | 1 | Deutsch 23W ASDD - Multiple Connectors |
| RLACS106 | 1 | VBOX Plastic Carry Case |
| VBFMAN | 1 | VBOX File Manager Unit |
| RLCAB005-C | 1 | Lemo 5W Plug - Lemo 5W Plug - 2m cable (VBOX-VBOX Module PWR/CAN) |
| RLCALUKAS | 1 | Certifiate of Calibration - UKAS Accredited Calibration Laboratory No. 21354 |
| RLCAB010LE | 1 | Lemo 2-way Plug - Cigar Plug - 2 m cable (Power) Screened |
Note: You may have to order additional cables separately
VBOX 3iS units are powered via the POWER IN lead or the CAN OUT + POWER lead on the supplied loom. You can power VBOX 3iS units from a wide range of voltage sources.
IMPORTANT
The maximum operating voltage input must not exceed 30 V DC. Failure to observe this could result in damage to the VBOX unit.
VBOX 3iS has been designed to generate as little heat as possible and it has a wide operating temperature range. It is, however, good practice to mount it in a position where it has sufficient airflow around the case.
| Cable | Function | Cable | Function |
|---|---|---|---|
| A | UNIT CONNECTOR | G | CAN IN |
| B | SERIAL | H | ETHERNET |
| C | POWER IN | I | CAN OUT + POWER |
| D | CAN OUT | J | AUX |
| E | DIGITAL IN | K | DGPS |
| F | DIGITAL OUT |
The reference point on the unit when you need to measure offsets and distances.
