When you purchase the ADAS Audio Sensor, you will find the following items when you open the box:
| Product Code | Quantity | Description | |
|---|---|---|---|
| RLADAS-AS-V1 | 1 | Audio Sensor Unit | |
| TV1AM20MB31 | 1 | USB-C to USB-A cable | |
| RLACS343 | 1 | External Microphone | |
| RLCAB005-C | 1 | 5-way LEMO to 5-way LEMO CAN cable | |
| RLCAB007-2 | 1 | 3-way LEMO to 4 wire unterminated cable |
| Product Code | Description |
|---|---|
| RLACS287 | Mount |
| ADC25IPCON | 25-way D-connector |
| SUBCON15M-SH | 15-way D-connector |
USB
When you connect the Audio sensor to the PC with the USB-A to USB-C cable, the unit will be powered by the PC via the cable so that you can see the live preview of the audio around you and configure the unit.
CAN
You can use a RLCAB005-C cable to connect the Audio Sensor to a VBOX unit to relay the live trigger data via CAN to the VBOX unit. You can see more information about the CAN message output here.
TRIG OUT
You can use the RLCAB007-2 cable wired to the Analogue Input connector to connect the Audio sensor to the VBOX unit. This will send the live trigger data to the VBOX unit via the Analogue Input.
There are multiple connection methods for the Audio Sensor:
The RLCAB007-2 is an unterminated cable that you can wire into a Sub-D 25-way connector to connect to the A IN port on a VBOX 3i unit.
Use the RLCAB005-C to connect from the CAN/PWR port on the Audio Sensor to a CAN port on the VBOX 3i unit.
This is an accessory that is to be used when the sound you are listening for comes from a location that is hard to reach.