Please register your MFD Touch so that Racelogic can continue to provide you with notifications about the latest software releases and firmware upgrades for your Racelogic product and offer technical support.
Register your device here.
| Product Code | Quantity | Description |
|---|---|---|
| VBMFDT | 1 | MFD Touch Unit |
| RLCAB005-C | 1 | VBOX to VBOX Module Cable (2 m) |
| RLACS331 | 1 | Swivel Neck Richter Suction Mount |
| RLACS313 | 1 | 8 GB SD Ultima Pro UHS-1 Memory Card |
Image missing
Image missing
The Standard parameters are from the standard Racelogic CAN output from the VBOX.
The Decel Test parameters are commonly used in brake testing, of which the majority require the use of a VBOX Brake Trigger Switch or a VBOX Pedal Force Sensor with an Event Marker Interface.
| Standard Parameters | Decel Test Parameters | Accel Test Parameters |
|---|---|---|
| Speed (km/h or mph)Satellite CountHeading (degrees north)UTC TimeHeight (m or ft)Vertical Velocity (km/h or mph)Longitudinal Acceleration (g or m/s²)Lateral Acceleration (g or m/s²)Max lateral Acceleration (g or m/s²)Average Speed (km/h or mph)Distance Travelled (m or ft)Longitude (degrees, minutes, decimal, seconds)Latitude (degrees, minutes, decimal, seconds)Solution TypeTriggerRadius of Turn (m or ft)Filename(VBOX 4 and VBOX 3i)Logging Status(VBOX 4 and VBOX 3i)Memory Used (%)(VBOX 4 and VBOX 3i)KF Status(VBOX 4, VBOX 3i and VBOX 3iS)Speed Quality (km/h or mph) | Deceleration Test NumberDeceleration Distance (m or ft)Deceleration Time (s)Deceleration Test Start Speed (km/h or mph)Deceleration AMS Distance (m or ft)Deceleration MFDD (g or m/s²)Average Deceleration (km/h or mph)Peak Deceleration (km/h or mph)Deceleration Centreline Deviation (m or ft)Trigger Test NumberDistance from Trigger (m or ft)Time from Trigger (s)Speed at Trigger (km/h or mph)Corrected Trigger Distance (m or ft)Trigger AMS Distance (m or ft)Trigger MFDD (g or m/s²)Trigger Average Deceleration (g or m/s²)Trigger Peak Deceleration (g or m/s²)Trigger Centreline Deviation (m or ft) | Acceleration Test NumberAcceleration Time (s)Acceleration Distance (m or ft)Maximum Speed (km/h or mph)Peak Acceleration (km/h or mph)Average Acceleration (km/h or mph)Speed at Distance (km/h or mph) |
When you connect MFD Touch to a VBOX data logger and have configured the CAN channels you want to capture, the VBOX CAN button will become available on the Select Data Source screen.
Product Limitation
CAN data source is not available with VBOX 3iS and VBOX Speed Sensor units.
For a CAN channel to be available for selection, it must be selected to be logged on the VBOX data logger in the VBOX Setup software and be compatible with the display element on MFD Touch.
IMPORTANT
If you configure the VBOX to log 32 or more CAN channels, you may witness erroneous behaviour where selected CAN parameters change on the MFD Touch display.If this occurs, you should reduce the number of CAN channels again.
The MFD Touch display powers via the connection to the VBOX data logger. On boot-up, MFD Touch will display a splash screen. As MFD Touch will boot quicker than the VBOX, it will display 'Waiting for VBOX' with a scrolling progress bar until the VBOX is fully booted.
MFD Touch Splash Screen
The first time the unit is booted up, it will display the 6 Numerical data screen.
MFD Touch comes supplied with an 8 GB SDHC card that you can use to save and load settings, save test results and update the firmware.
The supplied SD card is in a FAT32 file format, the only file format supported by MFD Touch.
If you wish to purchase a new SD card, we recommend that any card used has a write speed of more than 7 MB/s (4 MB/s absolute minimum) and a speed class of 10 (4 absolute minimum). We recommend SD cards from quality brands, such as Transcend, SanDisk, Kingston or Lexar, to ensure the best results possible.
Supplied or purchased SDHC cards are formatted in the FAT32 file format. This format is supported by MFD Touch.
Purchased SDXC cards will be formatted in exFAT or NTFS file formats; these formats are not supported by MFD Touch.
IMPORTANT
If an SD card is formatted in the exFAT or NTFS file formats, you will have to reformat it into a FAT32 file system before it will work with an MFD Touch unit. Please reformat as per the instructions below.
-
You can do FAT32 reformatting for media with sizes up to 32 GB directly in Windows by right-clicking on the media and selecting 'Format'.
- If you would like to format media with sizes above 32 GB into a FAT32 file system, it cannot be done directly within Windows, as it is not the standard formatting for the file. However, there are many third-party software programs you can use to reformat media to ensure they work correctly with our products. We can recommend This Tool as a free option from the SD card organisation.