EC Declaration of Conformity - Support Centre (Staging)

MFD Touch PIN OUTS

Right side view of MFD Touch

Connector 1 - CAN(5-pin Lemo) #

Bridged CAN bus with an active 120-ohm terminating resistor.

5 pin Lemo

PIN	I/O	Function
1	O	RS232 Tx (reserved for future development)
2	I	RS232 Rx (reserved for future development)
3	I/O	CAN High
4	I/O	CAN Low
5	I	Power
Chassis	I	Ground

5 pin Lemo

PIN	I/O	Function
1	O	RS232 Tx (reserved for future development)
2	I	RS232 Rx (reserved for future development)
3	I/O	CAN High
4	I/O	CAN Low
5	I	Power
Chassis	I	Ground

Connector 2(5-pin Lemo) #

Bridged CAN bus with an active 120-ohm terminating resistor.

5 pin Lemo

PIN	I/O	Function
1	O	RS232 Tx (reserved for future development)
2	I	RS232 Rx (reserved for future development)
3	I/O	CAN High
4	I/O	CAN Low
5	I	Power
Chassis	I	Ground

5 pin Lemo

PIN	I/O	Function
1	O	RS232 Tx (reserved for future development)
2	I	RS232 Rx (reserved for future development)
3	I/O	CAN High
4	I/O	CAN Low
5	I	Power
Chassis	I	Ground