To allow ADC03 to communicate with Video VBOX, it needs to be set into ‘Timed Mode’ using VBOX Setup.
The timer value is in milliseconds (ms). A smaller value means data will be sent more frequently, a larger value means data will be sent less frequently. The range of values that can be entered is 0 to 65535 however the minimum value that should be entered is 10. Below this value data values may be repeated on successive cycles. If a value of 0 is entered the module will change it to 1 on the next power cycle.
For further information on working with elements and creating scenes, please see the Video VBOX User Manual here.