DGNSS Telemetry Moving Base - Server Radio - EU (RLRTM24MBS)

Moving Base radios are used to transmit and receive corrections from VBOX 3i RTK units in a Moving Base setup. A Moving Base radio is programmed as ‘server’ when transmitting (vehicle equipped with the Moving Base VBOX) or ‘client’ when receiving RTK correction messages. There is no limit to the number of clients that can get corrections from a server.

No. of items	Product Code	Description
1	RTM24E-V2	VBOX ADAS server radio for moving base (transmit)
1	RLACS207	Elevated feed radio mag mount antenna
1	RLCAB006	5-way Lemo to 5-way Lemo Cable - 30 cm
1	RLCAB032	Serial PC cable for radio

Specifications #

Input Voltage

8 to 30 V DC

Input Current - Receiving

< 200 mA

Input Current - Transmitting

< 200 mA

Radio Transmission Power

10 mW

Base Station Duty Cycle

< 10%

Carrier Frequency

2.4 GHz

Radio Data Rate

500 kbit/s

RS232 Data Rate

115_200 bit/s (configurable)

Approvals

CE-approved for European use

Physical #

Module Dimensions

95 mm x 60 mm x 33 mm

Operating Temperature

- 20 °C to + 60 °C

Storage Temperature

- 40 °C to + 85 °C

Transmission Range #

Environment	10 mW
Permitted in countries such as	EU
Difficult Environment(e.g. buildings, reinforced concrete)	120 m (400 feet)
Open environment with antennas on ground level(e.g vehicle roofs)	400 m (1_300 feet)
In view with Base Station antenna at height(e.g. building roof)	2_400 m (8_000 feet)
Note: Obstacles such as walls and trees can greatly affect the range