The eight pre-set test screens allow the user to set up eight individual test profiles that can be accessed directly and quickly when testing a vehicle. The test that is displayed on the screen will be the test that is being conducted. At the end of each test the time and distance for the test is displayed and printed on a thermal printer if connected. The results of the test are also output on the CAN bus.
When you scroll to a new test the test name and start and end conditions are momentarily displayed, then the screen shows three parameters, Velocity, Time and Distance.
From any one of the eight Pre-set Test screens press OK to enter the Set up screens for the Pre-set test.
Entering the Setup menu from any of the pre-set tests will enter the general setup menu from which each of the pre-set tests can be configured. The Pre-set test numbers are shown on the screen, use the arrow buttons to scroll to the Pre-set screen you wish to edit then press OK to edit the test details.
