Please register your OLED Display so that Racelogic can continue to provide you with notifications about the latest software releases and firmware upgrades for your Racelogic product, and offer technical support.
Register your device here.
When you purchase a OLED Display DSP05-L, you will find the following items when you open the box:
| Product Code | Quantity | Description |
|---|---|---|
| VBDSP05-L | 1 | OLED Display with Lemo connector |
| RLACS287 | 1 | VBOX Lightweight Suction Mount |
| Features | |
|---|---|
| View Parameters, such as Live Speed, Max Speed, Lap Times and Predictive Lap Time | Internal accelerometer flips the display according to the mounting direction |
| Inverse screen colours or change font options for varying operation condition | Shows logging and capacity status of connected VBOX units |
| Easy Operation with the 3-button keypad | Recognises data from standard VBOX CAN and serial output |
| Low power consumption | Splash proof plastic and aluminium case |
| Lemo connector for connection to Video VBOX Pro and VBOX Video HD2 |
Depending on which mode is currently active on the screen, the function of the square button will change. The splash screen shown when scrolling through the menu describes the function of the square button in each mode.
You can also find the complete list below:
Depending on which mode is currently active on the screen, the function of the square button will change. The splash screen shown when scrolling through the menu describes the function of the square button in each mode.
You can also find the complete list below:
| Mode | Function |
|---|---|
| Speed | Start and stop logging |
| Max Speed | Reset max speed value |
| Speed Bar | Set centre speed and speed display range |
| Predictive Lap Timing | Single press fixes the current reference lap according to your settings inFixed Lap Mode |
| Predictive Lap Timing | Pressing for >4 s clears the stored reference lap and all lap timing data |
| Lap Timing | Set a new start/finish line |
| Lap Count | No action |
| Lateral G | Reset max g reached |
| Lateral G Bar | Set min g and max g (targets) |
| Longitudinal G | Reset max g reached |
| Longitudinal G Bar | Set min g and max g (targets) |
| Menu | Access the Menu |
To connect to a VBOX Video HD2, connect the cable into the ‘CAN / SER’ port.
To connect to a Video VBOX Pro, connect the cable into the ‘SER’ port.
The OLED display DSP05 has different display modes that you can access by using the ▲▼ buttons on the unit.
The data displayed on each screen is always calculated by the unit at all times, even if you choose not to display it. Click on the name of each mode to find relevant setup information.
Image missing
Image missing
Specified
You can load up to 8 user-defined scenes by placing them in the root folder of an SD card and inserting it into the connected VBOX unit. All the required scenes must be loaded at the same time. Every time you load scenes to the VBOX unit, they will overwrite those previously saved on the unit. You can select the scene on the DPS05 OLED Display. If there are scene files on the VBOX Unit, a screen will prompt you to select a scene when you power up the DSP05 OLED Display.
If you press the ▼ button when you see this prompt, the DSP05 OLED Display will show you a list of available scenes.
Once the DSP05 OLED Display is powered and in use, you can access the scene selection through the main menu.
Image missing
Specified
You can load up to 8 user-defined scenes by placing them in the root folder of an SD card and inserting it into the connected VBOX unit. All the required scenes must be loaded at the same time. Every time you load scenes to the VBOX unit, they will overwrite those previously saved on the unit. You can select the scene on the DPS05 OLED Display. If there are scene files on the VBOX Unit, a screen will prompt you to select a scene when you power up the DSP05 OLED Display.
If you press the ▼ button when you see this prompt, the DSP05 OLED Display will show you a list of available scenes.
Once the DSP05 OLED Display is powered and in use, you can access the scene selection through the main menu.
Image missing
Default
Each VBOX unit has a default scene included within the firmware. Press the square button when this option is highlighted to use this scene.
Image missing
Default
Each VBOX unit has a default scene included within the firmware. Press the square button when this option is highlighted to use this scene.
Image missing
Back
Press the square button with this line highlighted to exit the Scene Selection menu and go back to the main menu.
Image missing
Back
Press the square button with this line highlighted to exit the Scene Selection menu and go back to the main menu.
Image missing
When the VBOX unit has acquired satellites, it will check the GNSS location against Racelogic’s track map database and load the available layouts.
Where a track has multiple layouts, you must use this menu option to select the layout you are driving, as this allows the DSP05 OLED Display to load the correct start/finish line(s).
If start/finish lines are not available for your location, you can set them manually.
When the VBOX unit has acquired satellites, it will check the GNSS location against Racelogic’s track map database and load the available layouts.
Where a track has multiple layouts, you must use this menu option to select the layout you are driving, as this allows the DSP05 OLED Display to load the correct start/finish line(s).
If start/finish lines are not available for your location, you can set them manually.
Back
Press the square button with this line highlighted to exit the Track Selection menu and go back to the main menu.
Back
Press the square button with this line highlighted to exit the Track Selection menu and go back to the main menu.
The DSP05 OLED Display will store all the lap times from your current session (maximum of 99 lap times). The lap times will be cleared when you set a new start line or when you reset the lap timing data.
Back
Press the square button with this line highlighted to exit the Lap Times and go back to the main menu.
The DSP05 OLED Display will store all the lap times from your current session (maximum of 99 lap times). The lap times will be cleared when you set a new start line or when you reset the lap timing data.
Back
Press the square button with this line highlighted to exit the Lap Times and go back to the main menu.
Bar Range
This setting alters the amount of +/- time shown on the bar graph during lap prediction. You can choose either 2, 5, 10 or 30 seconds.
Press the square button when the bar range is highlighted to scroll through different time options.
Bar Range
This setting alters the amount of +/- time shown on the bar graph during lap prediction. You can choose either 2, 5, 10 or 30 seconds.
Press the square button when the bar range is highlighted to scroll through different time options.
When enabled, this mode will change the Predictive Lap Timing display to show your current speed as well as Delta-T information, when your speed drops below a specified threshold for a set amount of time.
This function is optimised for use with both 'Virtual Safety Car' conditions and Pit Lane speed limits.
The Delta-T Speed Mode is disabled by default. The default settings are:
Speed: 65 km/h
Time Delay: 1.5 seconds
The display will return to the Predictive Lap Timing mode when your speed increases to 5 km/h over the configured Delta-T Speed Mode value.
For example, if you have set your DSP05 OLED Display to Predictive Lap Timing mode and you have enabled Delta-T Speed Mode;
- When your speed drops below 65 km/h for a minimum of 1.5 seconds, the display will change to show your current speed alongside your Delta-T.
- When your speed increases to 70 km/h, the display will revert to Predictive Lap Timing Mode.
When enabled, this mode will change the Predictive Lap Timing display to show your current speed as well as Delta-T information, when your speed drops below a specified threshold for a set amount of time.
This function is optimised for use with both 'Virtual Safety Car' conditions and Pit Lane speed limits.
The Delta-T Speed Mode is disabled by default. The default settings are:
Speed: 65 km/h
Time Delay: 1.5 seconds
The display will return to the Predictive Lap Timing mode when your speed increases to 5 km/h over the configured Delta-T Speed Mode value.
For example, if you have set your DSP05 OLED Display to Predictive Lap Timing mode and you have enabled Delta-T Speed Mode;
- When your speed drops below 65 km/h for a minimum of 1.5 seconds, the display will change to show your current speed alongside your Delta-T.
- When your speed increases to 70 km/h, the display will revert to Predictive Lap Timing Mode.
Delta-T Speed Mode
Speed
Time Delay
Back
Transfer Ref. lap to...
This feature lets you save a reference lap for future use. Insert an SD card into the connected VBOX unit and use the following menu options.
Note: The vehicle must be stationary to make this transfer.
Transfer Ref. lap to...
This feature lets you save a reference lap for future use. Insert an SD card into the connected VBOX unit and use the following menu options.
Note: The vehicle must be stationary to make this transfer.
Load Ref. Lap from...
To load a reference lap file stored from a previous session, put the desired file onto an SD card and load the card into the VBOX unit. The file must be named OLED.REF and placed in the root directory of the SD card. Select the following menu options.
Note: The vehicle must be stationary to make this transfer.
Load Ref. Lap from...
To load a reference lap file stored from a previous session, put the desired file onto an SD card and load the card into the VBOX unit. The file must be named OLED.REF and placed in the root directory of the SD card. Select the following menu options.
Note: The vehicle must be stationary to make this transfer.
Minimum Lap Time
This setting allows you to set a minimum time for laps, making shorter laps invalid. Invalid laps will not be counted in the lap count, appear in the lap times or used as a reference lap.
Press the square button to change the minimum lap time. You will see two arrows (up and down) appear next to the number. Use the two arrow buttons on the device to increase/decrease the minimum time. Press the square button again to confirm your selected value.
Minimum Lap Time
This setting allows you to set a minimum time for laps, making shorter laps invalid. Invalid laps will not be counted in the lap count, appear in the lap times or used as a reference lap.
Press the square button to change the minimum lap time. You will see two arrows (up and down) appear next to the number. Use the two arrow buttons on the device to increase/decrease the minimum time. Press the square button again to confirm your selected value.
Fixed Lap Mode
Press the square button to toggle between the available settings:
Fix Current and Fix Stored.
Note: When you have fixed a reference lap, you will see a message confirming your selection on the screen and a Padlock icon will appear. If you fix a stored lap the icon will appear instantly, if you fix the current lap, the icon will appear when the lap has been completed.
Fixed Lap Mode
Press the square button to toggle between the available settings:
Fix Current and Fix Stored.
Note: When you have fixed a reference lap, you will see a message confirming your selection on the screen and a Padlock icon will appear. If you fix a stored lap the icon will appear instantly, if you fix the current lap, the icon will appear when the lap has been completed.
Fixed Stored
Fix Current
This option sets the current driven lap as the fixed reference once the lap has been completed.
Note - if you choose to fix the current lap, this should override any Minimum Lap Time setting as you are making the decision to set the current and full lap as the reference.
Back
Press the square button with this line highlighted to exit the Predictive Lap Timing Settings and go back to the main menu.
Image missing
Back
Press the square button with this line highlighted to exit the Predictive Lap Timing Settings and go back to the main menu.
Image missing
Set Start & Splits
Pressing the square button sets a new start/finish point. After this, the DSP05 OLED Display will read “Set split 1”. Press the square button to set the split or ▼ to skip through split points, Finish line and back. If you set a new start/finish or split line, the lap count, best lap and all the best split time values will be reset automatically.
Image missing
Set Start & Splits
Pressing the square button sets a new start/finish point. After this, the DSP05 OLED Display will read “Set split 1”. Press the square button to set the split or ▼ to skip through split points, Finish line and back. If you set a new start/finish or split line, the lap count, best lap and all the best split time values will be reset automatically.
Image missing
Clear Start & Splits
Press the square button to clear any start/finish and split point information from the DSP05 OLED Display's memory.
Image missing
Clear Start & Splits
Press the square button to clear any start/finish and split point information from the DSP05 OLED Display's memory.
Image missing
Reset Laptiming Data
With this option highlighted, press the square button to reset the stored reference lap, lap count and lap times.
Note: This option fully resets the predictive lap timing mode.
Reset Laptiming Data
With this option highlighted, press the square button to reset the stored reference lap, lap count and lap times.
Note: This option fully resets the predictive lap timing mode.
Split Time Display Period
This function allows you to set how long the split time is shown on the DSP05 OLED display when a split line or the start/finish line is crossed. There is a choice of 2s, 5s, 10s, 15s or 20s. Press the square button to cycle between these options.
Split Time Display Period
This function allows you to set how long the split time is shown on the DSP05 OLED display when a split line or the start/finish line is crossed. There is a choice of 2s, 5s, 10s, 15s or 20s. Press the square button to cycle between these options.
Split to Split Time
When this option is selected then the calculated split times will be split to split and not accumulative from the start of the lap.
Split to Split Time
When this option is selected then the calculated split times will be split to split and not accumulative from the start of the lap.
Rolling Lap Time
Selecting this function will show a continuously counting lap time which briefly freezes as the start/finish line is crossed.
Rolling Lap Time
Selecting this function will show a continuously counting lap time which briefly freezes as the start/finish line is crossed.
One Shot Mode
When one shot mode is enabled, timing will start when movement is detected, after being stationary for more than 10 seconds. This will automatically reset when the user comes to a stop. After 2 seconds of being stationary, the screen counts down from 5 then shows ARMED – Start when ready.
One Shot Mode
When one shot mode is enabled, timing will start when movement is detected, after being stationary for more than 10 seconds. This will automatically reset when the user comes to a stop. After 2 seconds of being stationary, the screen counts down from 5 then shows ARMED – Start when ready.
Gate Width
1-100 m
Gate Width
1-100 m
Back
Image missing
Back
Image missing
Modes
The DSP05 OLED Display has two Display Menu Modes for the Features; Basic Mode and Advanced Mode. This allows you to keep the full functionality of the DSP05 OLED Display or to reduce the amounts of Display modes to the Basic features. The tables below list the Display Modes available in each Display Menu Mode.
Press the square button to toggle between the options:
Image missing
Modes
The DSP05 OLED Display has two Display Menu Modes for the Features; Basic Mode and Advanced Mode. This allows you to keep the full functionality of the DSP05 OLED Display or to reduce the amounts of Display modes to the Basic features. The tables below list the Display Modes available in each Display Menu Mode.
Press the square button to toggle between the options:
Image missing
Basic Modes
| Basic Features |
|---|
| Speed |
| Lap Timing |
| Predictive Lap Timing |
| Menu |
Advanced Modes
| Advanced Features (Default) |
|---|
| Speed |
| Lap Timing |
| Predictive Lap Timing |
| Menu |
| Max Speed |
| Speed Bar |
| Lateral G |
| Longitudinal G |
| Lap Count |
Back
Press the square button with this line highlighted to exit the Modes settings and go back to the Display Menu.
Back
Press the square button with this line highlighted to exit the Modes settings and go back to the Display Menu.
Speed Units
If the square button is pressed the DSP05 OLED Display allows the user the ability to select the units of the displayed speed. Highlight the desired measurement type and press square to select. mph, km/h, kts
Speed Units
If the square button is pressed the DSP05 OLED Display allows the user the ability to select the units of the displayed speed. Highlight the desired measurement type and press square to select. mph, km/h, kts
Speed Decimal Places
Pressing the square button will cycle through 0, 1, and 2 decimal places.
Speed Decimal Places
Pressing the square button will cycle through 0, 1, and 2 decimal places.
Back
Back
Accel Decimal Places
Press the square button to toggle through 0, 1, and 2 decimal places.
Accel Decimal Places
Press the square button to toggle through 0, 1, and 2 decimal places.
Accel Smoothing
Press the square button to toggle through five smoothing settings.
Accel Smoothing
Press the square button to toggle through five smoothing settings.
Back
Press the square button with this line highlighted to exit the Accel Settings and go back to the Display Menu.
Image missing
Back
Press the square button with this line highlighted to exit the Accel Settings and go back to the Display Menu.
Image missing
Brightness
Press the square button to toggle through five brightness settings. 1 is the darkest setting and 5 is the brightest setting. The display will change its brightness as you toggle through each setting to make it easier to find the correct level for you.
Image missing
Brightness
Press the square button to toggle through five brightness settings. 1 is the darkest setting and 5 is the brightest setting. The display will change its brightness as you toggle through each setting to make it easier to find the correct level for you.
Image missing
Invert Screen Colour
Press the square button when an option is highlighted to toggle it on or off. When you select an option, a tick will appear next to it and the display applies the setting accordingly. See the images below for examples of the four different colour and font combinations.
Invert Screen Colour
Press the square button when an option is highlighted to toggle it on or off. When you select an option, a tick will appear next to it and the display applies the setting accordingly. See the images below for examples of the four different colour and font combinations.
Use Outline Font
Press the square button when an option is highlighted to toggle it on or off. When you select an option, a tick will appear next to it and the display applies the setting accordingly. See the images above for examples of the four different colour and font combinations.
Use Outline Font
Press the square button when an option is highlighted to toggle it on or off. When you select an option, a tick will appear next to it and the display applies the setting accordingly. See the images above for examples of the four different colour and font combinations.
Back
Press the square button with this line highlighted to exit the Display Menu and go back to the Main Menu.
Back
Press the square button with this line highlighted to exit the Display Menu and go back to the Main Menu.
In this section, you can find the Installed firmware version and the serial number for both the DSP05 OLED Display and the connected VBOX data logger. You can also find the unit type for the connected VBOX data logger.
The firmware version of the OLED Display will also be visible on the screen while it boots up.
Back
Press the square button with this line highlighted to go back to the Main Menu.
Image missing
Image missing
In this section, you can find the Installed firmware version and the serial number for both the DSP05 OLED Display and the connected VBOX data logger. You can also find the unit type for the connected VBOX data logger.
The firmware version of the OLED Display will also be visible on the screen while it boots up.
Back
Press the square button with this line highlighted to go back to the Main Menu.
Image missing
Image missing
Image missing
Image missing