In speed mode, the screen will display a large clear speed value with up to 2 decimal places. You can set the speed to display in kph, mph or knots. You can adjust the number of decimal places displayed. For more information on how to change these settings, see here.
Note: To start or stop data logging on the OLED Display, press the square button when in Speed Display mode.
Image missing
In speed mode, the screen will display a large clear speed value with up to 2 decimal places. You can set the speed to display in kph, mph or knots. You can adjust the number of decimal places displayed. For more information on how to change these settings, see here.
Note: To start or stop data logging on the OLED Display, press the square button when in Speed Display mode.
Image missing
All lap times and split times are interpolated to 0.01-second resolution.
In the Lap Timing mode, the screen can display either a live rolling lap time or a static last lap time and the lap count. You can set this in the Lap Timing Menu.
All lap times and split times are interpolated to 0.01-second resolution.
In the Lap Timing mode, the screen can display either a live rolling lap time or a static last lap time and the lap count. You can set this in the Lap Timing Menu.
Setting a start/finish line
On the lap timing screen, you can set a new start/finish line by pressing the square button. If you press the button by mistake, you can cancel the process by pressing the ▼ button within 5 seconds.
If you also require split lines or a separate finish, you must use the ‘set start, finish and splits’ option in the Main Menu.
You can also set a new start/finish line when using the Lap Timing screen by pressing the square button. If you press the button by mistake, you can cancel the process by pressing the ▼button within 5 seconds.
If you also require split lines or a separate finish, use the ‘set start and splits’ option in the Lap Timing Menu.
Note: The vehicle must be moving >0.5 km/h before you can set a Start/Finish Line.
On the lap timing screen, you can set a new start/finish line by pressing the square button. If you press the button by mistake, you can cancel the process by pressing the ▼ button within 5 seconds.
If you also require split lines or a separate finish, you must use the ‘set start, finish and splits’ option in the Main Menu.
You can also set a new start/finish line when using the Lap Timing screen by pressing the square button. If you press the button by mistake, you can cancel the process by pressing the ▼button within 5 seconds.
If you also require split lines or a separate finish, use the ‘set start and splits’ option in the Lap Timing Menu.
Note: The vehicle must be moving >0.5 km/h before you can set a Start/Finish Line.
Before you can use this mode, you need to set a start/finish line. Make sure that you have selected a track layout in the main menu or set a start line manually.
Before you cross the start line, the screen will show Waiting for start line and the distance from your current location to it.
Before you cross the start line, the screen will show Waiting for start line and the distance from your current location to it.
When you first cross the line and during the first lap, OLED Display will create a reference lap.
The second time you cross the start line, the OLED Display starts predicting.
The second time you cross the start line, the OLED Display starts predicting.
The reference lap will be replaced with any subsequent quicker lap time. However, you a fix a reference lap to prevent faster lap times from replacing it.
Fix the reference lap time by pressing the square button at any time during your lap. Pressing the square button will either fix the lap you are currently driving or fix a lap saved in the memory. You can choose which reference lap to fix under Fixed Lap Mode in the Predictive Lap Timing Settings.
Note: When you have fixed a reference lap, you will see a message confirming your selection on the screen and you will see a padlock icon in the top left corner.
- If you fix a stored lap the icon will appear instantly.
- If you fix the current lap, the icon will appear when the lap you are currently driving has been completed.
The reference lap will be replaced with any subsequent quicker lap time. However, you a fix a reference lap to prevent faster lap times from replacing it.
Fix the reference lap time by pressing the square button at any time during your lap. Pressing the square button will either fix the lap you are currently driving or fix a lap saved in the memory. You can choose which reference lap to fix under Fixed Lap Mode in the Predictive Lap Timing Settings.
Note: When you have fixed a reference lap, you will see a message confirming your selection on the screen and you will see a padlock icon in the top left corner.
- If you fix a stored lap the icon will appear instantly.
- If you fix the current lap, the icon will appear when the lap you are currently driving has been completed.
If you press and hold the square button for 4 seconds when in this mode, the unit will clear the stored reference lap as well as all lap timing data.
If you press and hold the square button for 4 seconds when in this mode, the unit will clear the stored reference lap as well as all lap timing data.
This feature allows the user to save a reference lap for future use. Insert an SD card into the Video VBOX Lite and select MENU > PREDICTIVE LAP SETTINGS > TRANSFER REF LAP TO XXX.
A message will be displayed to confirm that the lap was saved successfully. This will be stored in the root directory on the SD card as OLED.REF.
Note: The vehicle must be stationary to make this transfer.
To load a saved reference lap file from a previous session, copy the desired file into the root directory of an SD card, and insert the SD card into the Video VBOX Lite. The file must be called OLED.REF. Select MENU > PREDICTIVE LAP SETTINGS > LOAD REF LAP FROM XXX.
Reference laps will be reset, either when you set a new start/finish or if the ‘reset lap timing data’ option is selected in the lap timing menu.
Note: The vehicle must be stationary to make this transfer.
You can also create a reference lap with the Circuit Tools software, as described here.
You can alter the amount of time shown on the bar graph in the main menu to 2, 5, 10 or 30 seconds.
You can alter the amount of time shown on the bar graph in the main menu to 2, 5, 10 or 30 seconds.
