The screen will display data when the VB2 is operating. It also displays all the menus required to configure the VB2 via the front panel controls.
On start-up, the display screen shows the unit’s firmware version and current offset value.
During normal operation, the display screen displays Speed (mph or km/h) and Slip Angle (dual antenna units only) Scroll left or right ( ‘◄’and ‘►’), to display Pitch or Roll Angle instead.* As well as the number of satellites that the VB2 has locked on to, there are also three status indicators at the top of the display.
*Slip, pitch and roll angle only available on dual / triple antenna units.
| GPS Status | Front Panel Light Status | ||
|---|---|---|---|
| No Satellite Lock | - | SAT (flashing) | RTK (flashing) |
| Full Lock | OK | - | - |
| Antenna A only SAT Lock | - | RTK (flashing) | RTK (flashing) |
| Antenna A and B SAT Lock* | - | RTK | RTK (flashing) |
| Antenna A and C SAT Lock* | - | RTK (flashing) | RTK |
* SL twin / triple antenna units only
If a DGPS mode is enabled, it is indicated by the middle indicator light with one of the following messages.
| DGPS Mode | Light Status |
|---|---|
| WAAS, SBAS or EGNOS Differential correction | WAAS |
| 40 cm Differential correction from Base station | 40 cm |
Logged File name:
When an SD card is inserted the file name of the logged file appears on the screen whilst data is being logged.