VBOX 3i (v1-v2) Pinouts - Support Centre (Staging)

VBOX 3i Singel Antenna - front view

Front View of VBOX 3i Single Antenna (v1-v2)

Connector 1 - POWER (2-pin Lemo) #

PIN		I/O		Function		Connector
1		I		Power +
2		I		Ground

Connector 2 - AD 1 (3-pin Lemo) #

One Analogue and One Digital Output

PIN		I/O		Function		Connector
1		O		Isolated Analogue Out 1 (0 to 5 V)
2		O		Digital Out 1 (0 to 5 V)
3		O		Analogue Ground
Shell		O		Digital Ground

Connector 3 - AD 2 (3-pin Lemo) #

One Analogue and One Digital Output

PIN		I/O		Function		Connector
1		O		Isolated Analogue Out 2 (0 to 5 V)
2		O		Digital Out 2 (0 to 5 V)
3		O		Analogue Ground
Shell		O		Digital Ground

Connector 4 - D IN (3-pin Lemo) #

PIN		I/O		Function		Connector
1		I		Ground
2		I		Digital Input 2 - Logging on/off (0 to 5 V - 14 V tolerant)
3		I		Digital Input 1 - Brake Trigger (0 to 5 V - 14 V tolerant)

Connector 5 - CAN (5-pin Lemo) #

PIN		I/O		Function		Connector
1		O		RS232 Tx - PORT A (± 12 V)
2		I		RS232 Rx - PORT A (± 12 V)
3		I/O		CAN High - PORT B
4		I/O		CAN Low - PORT B
5		O		+V Power (Same as Power +)

Connector 6 - SERIAL (5-pin Lemo) #

PIN		I/O		Function		Connector
1		O		RS232 Tx - PORT A (± 12 V)
2		I		RS232 Rx - PORT A (± 12 V)
3		I/O		CAN High - PORT B
4		I/O		CAN Low - PORT B
5		O		+V Power (Same as Power +)

Connector 7- Antenna A #

PIN		I/O		Function		Connector
Center		N/A		RF Signal/Power for active antenna
Chassis		N/A		Ground

Connector 8 - Analogue Input Connector #

VBOX 3i Single Antenna (v2)

PIN		I/O		Function		Connector
1		I		Isolated Channel 1 + (1.8 M Ohms input impedance)
2		I		Isolated Channel 1 – (1.8 M Ohms input impedance)
3		I		Isolated Channel 2 + (1.8 M Ohms input impedance)
4		I		Isolated Channel 2 – (1.8 M Ohms input impedance)
5		I		Isolated Channel 3 + (1.8 M Ohms input impedance)
6		I		Isolated Channel 3 – (1.8 M Ohms input impedance)
7		I		Isolated Channel 4 + (1.8 M Ohms input impedance)
8		I		Isolated Channel 4 – (1.8 M Ohms input impedance)
9-13		N/C		N/A
14		O		Vbatt (Equal to Input Voltage. 200 mA)
15		O		Ground
16		O		5 V Out (5 V ± 2 %. 350 mA)
17		O		Ground
18-25		N/C		N/A

VBOX 3i Single Antenna (v1)

PIN		I/O		Function		Connector
1		I		Isolated Channel 1 + (1.8 M Ohms input impedance)
2		I		Isolated Channel 1 – (1.8 M Ohms input impedance)
3		I		Isolated Channel 2 + (1.8 M Ohms input impedance)
4		I		Isolated Channel 2 – (1.8 M Ohms input impedance)
5		I		Isolated Channel 3 + (1.8 M Ohms input impedance)
6		I		Isolated Channel 3 – (1.8 M Ohms input impedance)
7		I		Isolated Channel 4 + (1.8 M Ohms input impedance)
8		I		Isolated Channel 4 – (1.8 M Ohms input impedance)
9-13		N/C		N/A
14		O		Vbatt (Equal to Input Voltage. 100 mA)
15		O		Ground
16		O		5 V Out (5 V ± 2 %. 350 mA)
17		O		Ground
18-25		N/C		N/A