Solid green indicates that a suitable power source is connected, unit is fully booted and ready to use.
Image missing
Image missing
Solid green indicates that the event marker input has been activated/triggered.
Image missing
Flashing green indicates that expected incoming CAN data has been decoded properly and is being logged.
Image missing
Flashing green indicates that expected incoming CAN data has been decoded properly and is being logged.
Image missing
Flashing yellow indicates that there is incoming Serial traffic through this socket.
Image missing
V2 Bluetooth module – Flashing blue indicates Bluetooth is initialising communications with a Bluetooth device.
Image missing
Image missing
Flashes blue when data is being written to the card.
Image missing
Solid green when the VBOX is capturing data to the CF card.
Image missing
Flashing red indicates no satellites in view
Image missing
Image missing
Flashing orange indicates DGPS is set but not locked (either 2 cm RTK, 40 cm local DGPS or NTRIP).
Image missing
Image missing
Image missing
Solid orange indicates that the IMU integration is enabled but that no IMU is connected or that the detected IMU is invalid.
When using an IMU04, you must make sure that it is:
- connected using an RLCAB119 to the 25-way D connector
- is set to Racelogic CAN mode
- is running the latest release firmware
Image missing
Image missing
Image missing
Image missing