Please register your Performance Box Touch so that Racelogic can continue to inform you about the latest software releases and firmware upgrades and offer technical support.
Register your unit here.
| Product Code | Quantity | Description |
|---|---|---|
| PBT-V1 | 1 | Performance Box Touch Unit |
| RLACS184 | 1 | Cigar Plug USB Adapter |
| USB2-007241 | 1 | USB 2.0 A to Right Angle Micro B data and Charging Cable, 1.5 m |
| RLACS313 | 1 | 8 GB SD Ultima Pro UHS-1 Memory Card |
| RLACS277 | 1 | Swivel Neck Richter Suction Mount |
| Product Code | Quantity | Description |
|---|---|---|
| PBT-V1 | 1 | Performance Box Touch Unit |
| RLACS184 | 1 | Cigar Plug USB Adapter |
| USB2-007241 | 2 | USB 2.0 A to Right Angle Micro B data and Charging Cable, 1.5 m |
| RLACS313 | 1 | 8 GB SD Ultima Pro UHS-1 Memory Card |
| RLACS277 | 1 | Swivel Neck Richter Suction Mount |
| RLACS290 | 1 | Performance Box Touch Battery |
| RLACS284 | 1 | GPS/GLONASS Low Profile Antenna, 2 m |
| RLACS281 | 1 | Plastic Carry Case |
The supplied USB cable (USB2-007241) plugs into the Power socket on the right-hand side of the unit. Use the supplied Cigar Plug USB Adapter (RLACS184) and the vehicle's 12 V cigar power socket to power the Performance Box Touch.
You can also have the Performance Box Touch powered by the battery (which is available from Racelogic – RLACS290). You can find more information on the battery below.
When booting up, the Performance Box Touch will display a splash screen and automatically look for satellites and media.
The first time the unit is booted up, it will present the Display Mode screen. Every time after this, it will present the previously used display mode.
To give you the opportunity to use the unit without connecting it to a power source, we have a battery (the RLACS290) available for the Performance Box Touch.
When the battery is installed, you can use the Power button on the battery to turn the unit on or off. You do this by pressing and holding the Power button for a few seconds.
If you plug the power cable into the unit when the battery is already attached to the unit, the unit will turn on automatically.
The battery will provide a minimum of 6 hours of battery life, however, you can increase the battery life up to 9 hours by using the minimum brightness settings.
To give you the opportunity to use the unit without connecting it to a power source, we have a battery (the RLACS290) available for the Performance Box Touch.
When the battery is installed, you can use the Power button on the battery to turn the unit on or off. You do this by pressing and holding the Power button for a few seconds.
If you plug the power cable into the unit when the battery is already attached to the unit, the unit will turn on automatically.
The battery will provide a minimum of 6 hours of battery life, however, you can increase the battery life up to 9 hours by using the minimum brightness settings.
You can find the full battery specifications here.
When the battery is installed in the Performance Box Touch, it will charge while the unit is being powered via a power source. You can also charge it while it is removed from the unit by using the supplied USB cable (USB2-007241) and the USB port located above the Power button.
The battery needs approximately 3.5 hours to charge. To have the shortest charging time possible, we recommended that you charge the battery from a mains power source while it is disconnected from the Performance Box Touch.
If you are experiencing issues when charging the battery, take a look at our troubleshooting page.
When the unit is 'idle' (tracking zero satellites, not logging and has no screen interactions for 5 consecutive minutes), the Performance Box Touch will power off to preserve the battery.
Before it powers off, you will see a warning screen appear. If you do not want it to power off, you have 10 seconds to press the screen to cancel it.
Auto Power-off Warning Screen