The Ethernet menu contains Ethernet settings for robot applications.
Ethernet will be set to Off by default.
Select the ABD robot message mode to enable Ethernet for ABD applications.
Select the Humanetics robot message to enable Ethernet for Humanetics applications.
When you enable Ethernet for a robot message, the Ethernet settings will become available underneath.
Give your VBOX unit a static IP address by typing the required IP address in the text boxes in this setting.
When using subnet masks, you can enter the relevant IP address in this setting.
This setting determines the IP address that the VBOX will transmit the network data to (robot or robot controller).
Give your VBOX unit a static IP address by typing the required IP address in the text boxes in this setting.
When using subnet masks, you can enter the relevant IP address in this setting.
This setting determines the IP address that the VBOX will transmit the network data to (robot or robot controller).
This setting defines the port to which the VBOX will transmit the network data.