Quick Start Guide

Please register your VBOX 4 unit so that Racelogic can continue to provide you with notifications about the latest software releases and firmware upgrades for your Racelogic product, and offer technical support.

Register your device here.

1. Connect one end of an antenna cable to the connector on the antenna(s).
2. Place the antenna(s) on the roof of the vehicle.

You can read more about how and where to place the GNSS antennas here.

3. Connect the primary (A) and secondary (B) antennas to the A and B antenna ports on the VBOX 4 unit. 
4. Connect the power cable to the PWR port on the VBOX 4 unit.
5. Connect the Tablet/Laptop to the USB port on the VBOX 4 unit with the USB cable (RLCAB042).
6. Secure the VBOX unit in the vehicle.
   You can, for example, place it in the foam insert in the carry case and secure the carry case in the back seat of the vehicle with the seat belt. 

You can find the complete information about how to connect VBOX 4 ADAS to the different modules and accessories required for testing here.

VBOX Setup is a software application that configures VBOX 4 units. You can download the VBOX Setup software here.

The connection between the VBOX unit and the computer should be made via USB or Bluetooth for optimum performance.

When the VBOX unit is physically connected and powered, open the VBOX Setup software and use the dropdown list to select the COM port that your VBOX unit is connected to. Click Connect. VBOX Setup will open the configuration window for your VBOX unit. 

*The load sequence has been shortened for this gif

Available menus

The menu tiles in the sidebar allows you to select between the different menus. Click button to open that menu.

Menu title

Displays the title of the menu you are currently in.

Help

Depending on which menu you have open, the question mark icon will open up the corresponding User Guide page in the Racelogic Support Centre, to provide more information about the features and settings in this menu.

Language

Change the operating language.

Settings area

The main area in the application window (white background) contains the options for the menu you have selected.

Load

Click on the Load icon to load an existing configuration file into VBOX Setup.

Save

Click on the Save icon to save your current configuration to a VBOX configuration file on your local computer.

Reset Defaults

Click on the Reset defaults button to reset the current configuration to the VBOX Setup default settings.

Write to unit

After making changes to the configuration, you must press the Write to unit button to make sure that the settings are uploaded to the connected VBOX unit.

Close

Closes the software, if changes have not been saved to the unit, you will be prompted to save the settings.